Jual disconnect switch explosion proof or panel explosion proof

Jumlah Pesanan:

Negara Asal:

Amerika Serikat

Applications
EXP-NFD and EXB-FDS Series hinged
cover disconnect switches are used:
� In locations made hazardous due to
the presence of flammable gasses
or vapors or ignitable dusts, fibers
and flyings.
� Outdoors or indoors in damp, wet
and dirty locations, or in areas where
frequent washdowns, heavy rain or
water spray routinely occurs.
� Use as motor circuit disconnect and
to provide short circuit protection
( fused version) of lighting and power
circuits.
Features
� Copper-free aluminum construction,
high strength, lighter in weight and
corrosion resistant.
� Fewer cover bolts ( no corner bolts
required) reduces installation and
maintenance time. Cover bolts are
stainless steel.
� Gasketed flange with O-ring located
in side bolt circle to seal
out moisture.
� Stainless steel hinges are standard.
� Switch operating handle of copperfree aluminum can be padlocked,
with up to 3 locks, in either the
� ON� or � OFF� position.
� Ductile mounting lugs adjust to
irregular mounting surfaces.
� Bodies have top and bottom drilled
and tapped conduit entrances for
power and drain/ breather.
� Switches are used on all 30 to
400 Ampere assemblies.
� For Horsepower Ratings and
Dimensions, see page DE11.
� Disconnect Switches suitable for type
� J� fuses only.
Standard Materials/ Finish
� Enclosures: Copper-free aluminum
( less than 4/ 10 of 1% copper content
� Hinges and Cover Bolts: Stainless
steel
� Aluminum lacquer paint finish
Electrical Rating Ranges
� 600 VAC
� 30, 60, 100, 200 and 400 Amp

Kenalkan ke teman Anda laberman@cbn.net.id