Selamat Datang di
Prioritas IndocraftersTahun ke-17
BUCK BioSlide� Model B1020 Programmed Sampling for Screening Airborne Aerosols � Small, lightweight, compact � Easy to use � Accepts BUCK Impaction-Gel Slides or generic greased slides � Battery powered, recharge or operate with Included Charger/ Adapter � Five hour* run time at 15 LPM � Optional FastOne�Charger (provides full charge in one hour) � End-of-cycle and Battery Level audible & visual � Tripod mount for area sampling The BUCK BioSlide� Model B1020 Sampling Pump is a compact, lightweight 10-20 LPM controlled flow sampling pump for bioaerosol sampling with BUCK Impaction-Gel (also accommodates generic grease slides ). The easy, full-control keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy calibrations without tools, or perform manual timed sampling at the touch of a button. A group of status LEDs show the BUCK BioSlide� Model B1020 operation at a glance. Both an LED and audible alarm provide confirmation of end-of-sample or depleted battery. The BUCK BioSlide� Model B1020 Pump provides a full five hours of continuous operation (at 15 LPM) from its rechargeable NiCad batteries. It comes with a Calibrated Rotameter for quick flow check or calibration and a Standard Charger. An optional FastOne� one-hour charger provides the ultimate in power management and time savings. Specifications: Model B1020 Flowrate: 10�20 LPM constant flow Accuracy: ± 5% of set point Run Time: 10 LPM: 9 hrs,15 LPM: 5 hrs, 20 LPM: 3.5 hrs Size: 4� H x 6� W x 5¼� D (10.2 cm H x 15.2 cm W x 13.3 cm D) Weight: 29 oz. (826 g) Compatibility: BUCK Gel-Impaction Slide