CM29-100 GILMORE APPARATUS ASTM C 91, C266, AASHTO T 154 This apparatus is used to determine the setting time of cement. The horizontal arm supports are from cast lightweight aluminum alloy.....

CM25-160 THREE UNIT 50 MM CUBE MOULD ASTM C 109, AASHTO T 106 This mould made from steel, hardness 5 HRB, and can be also used for soil and other materials. Weight approx 3 kg. CM25-170 THREE....

CM25-150 ONE UNIT BRIQUETTE MOULD ASTM C 109, C307, AASHTO T 132 Accuracy machined from brass to the dimension in the relevant specification. Made of two parts, easy collapsible. Supplied....

CM25-140 THREE UNIT BRIQUETTE MOULD ASTM C 109 , C 307, AASHTO T 132 Made from brass, it conforms to the above specification and is easy collapsible. Weight approx 10 kg

CM25-100 THREE UNIT MOULD FORM PRISMS UNI 6009 This mould is made from Cr/ Ni steel, hardness 60 HRC, it is supplied complete with base, top lever and safety catch to avoid disengagement during....

CM23-100 LENGTH COMPARATOR ASTM C 490 This very sensitive instrument is used to measure the length variation of 25 x 25 x 250 mm, cement specimen in Autoclave soundness test. It can also be used....

CM21-100 PLASTER EXTENSOMETER BS 1191 This device is utilized to measure the linear expansion in laboratory of a paste of standard consistency. The expansion is measured after a period of 24....

CM19-110 THREE GANG MOULD FOR SHRINGKAGE TEST UNI 6687 Mould three gang to produce 40 x 40 x 160 mm specimen for linear hydraulic shrinkage testing. Made from Cr/ Ni steel, hardness 60HRC. All....

M19-100 PRISMS MOULD TWO GANG ASTM C 490 To produce 25 x 25 x 250 mm specimen, for expansion test on cement. Made from steel designed for a gauge length of 250 mm, measured between the ineed ends....

CM17-100 MORTAR MIXERHOBART ASTM C 305, C 227, AASHTO T 162 This table-mounted mixer has both planetary and revolving mixing actions. Three speed can be selected 139 â € “ 285 â € “ 591 rpm for the....

CM15-100 AUTOCLAVE FOR SOUNDNESS OF PORTLAND CEMENT ASTM C 151, C 141 High pressure Autoclave designed to carry out expansion test on cements, and the change of specimen length is determined by....

CM13-100 WATER RETENTION APPARATUS ASTM C 91, C 110 Using to determine the density of masonry cement and lime putty so to obtain a yield volume value. This set consist of : CM13-110 Water....

CM11-100 BULK CEMENT SAMPLER ASTM C 183, AASHTO T 127 This sampler is used to sampler cement in bulk storageâ € ™ s or shipment. It consists of two concentric brass tubes with slots. Inside tube....

AT50-100 GRAVEL PACKING SAND CRUSH RESISTANCE TESTER For measuring the value of crush resistance of gravel sand. Capacity 2400 lbs or 12 ton metric. Hand operated, Single Gauge. This set....

Set AT46-100 ORGANIC IMPURITIES TEST ASTM C 40, AASHTO T21 Aggregates contain organic impurities may not be satisfactory for inclusions in concrete. Organic impurities ( usually tannic acid and....